一、問題
pg_ctl start啟動時報錯退出：pg_ctl：server did not start in time。超時時間是多少？從什么時候到哪個階段算超時？

成都創新互聯公司專注于企業營銷型網站、網站重做改版、湛河網站定制設計、自適應品牌網站建設、H5開發、商城網站建設、集團公司官網建設、成都外貿網站制作、高端網站制作、響應式網頁設計等建站業務，價格優惠性價比高，為湛河等各大城市提供網站開發制作服務。

二、分析：該信息打印位置，從后面代碼段do_start函數中可以看出
1、pg_ctl start調用start_postmaster啟動PG的主進程后，每隔0.1ms檢查一次postmaster.pid文件，是否已寫入ready/standby
2、總共會檢查600次，即從啟動主進程后，最多等待60s，如果沒有寫入ready/standby則打印上述日志并退出
3、默認等待時間是60s，如果pg_ctl start -t指定等待時間，則等待時間為該指定時間

三、什么時候postmaster.pid文件寫入ready/standby
1、如果是主機不管有沒有設置hot standby
?? ?1）當startup進程恢復完成退出時，調用proc_exit函數向主進程發送SIGCHLD信號并退出
?? ?2）主進程接收到信號后，signal處理函數reaper調用AddToDataDirLockFile向postmaster.pid文件寫入ready
2、如果是備機即data目錄下有recovery.cnf文件，且設置了hot standby，在實際恢復前沒有到達一致性位置
?? ?1）startup進程向主進程發送PMSIGNAL_RECOVERY_STARTED信號，主進程調用信號處理函數sigusr1_handler，將pmState=PM_RECOVERY
?? ?2）每次讀取下一個xlog前都會調用CheckRecoveryConsistency函數進行一致性檢查：
?? ??? ?2.1 進入一致性狀態，starup進程向主進程發送PMSIGNAL_BEGIN_HOT_STANDBY信號，主進程接收到信號后調用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件寫入ready
3、如果是備機即data目錄下有recovery.cnf文件，且設置了hot standby，在實際恢復前沒有到達一致性位置
?? ?1）startup進程向主進程發送PMSIGNAL_RECOVERY_STARTED信號，主進程調用信號處理函數sigusr1_handler，將pmState=PM_RECOVERY
?? ?2）每次讀取下一個xlog前都會調用CheckRecoveryConsistency函數進行一致性檢查。如果沒有進入一致性狀態
?? ?3）本地日志恢復完成，切換日志源時同樣調用CheckRecoveryConsistency函數進行一致性檢查
?? ??? ?3.1 進入一致性狀態，starup進程向主進程發送PMSIGNAL_BEGIN_HOT_STANDBY信號，主進程接收到信號后調用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件寫入ready
4、如果是備機即data目錄下有recovery.cnf文件，且設置了hot standby，在實際恢復前到達一致性位置
?? ?1）startup進程向主進程發送PMSIGNAL_RECOVERY_STARTED信號，主進程調用信號處理函數sigusr1_handler，將pmState=PM_RECOVERY
?? ?2）CheckRecoveryConsistency函數進行一致性檢查，向主進程發送PMSIGNAL_BEGIN_HOT_STANDBY信號，主進程接收到信號后調用sigusr1_handler->AddToDataDirLockFile向postmaster.pid文件寫入ready
5、如果是備機即data目錄下有recovery.cnf文件，沒有設置hot standby
?? ?1）startup進程向主進程發送PMSIGNAL_RECOVERY_STARTED信號
?? ?2）主進程接收到信號后，向postmaster.將pmState=PM_RECOVERY

四、代碼分析
1、pg_ctl start流程

do_start->
    pm_pid = start_postmaster();
    if (do_wait){
        print_msg(_("waiting for server to start..."));
        switch (wait_for_postmaster(pm_pid, false)){
            case POSTMASTER_READY:
                print_msg(_(" done\n"));
                print_msg(_("server started\n"));
                break;
            case POSTMASTER_STILL_STARTING:
                print_msg(_(" stopped waiting\n"));
                write_stderr(_("%s: server did not start in time\n"), progname);
                exit(1);
                break;
            case POSTMASTER_FAILED:
                print_msg(_(" stopped waiting\n"));
                write_stderr(_("%s: could not start server\n" "Examine the log output.\n"), progname);
                exit(1);
                break;
        }
    }else
        print_msg(_("server starting\n"));

wait_for_postmaster->
    for (i = 0; i < wait_seconds * WAITS_PER_SEC; i++){
        if ((optlines = readfile(pid_file, &numlines)) != NULL && numlines >= LOCK_FILE_LINE_PM_STATUS){
            pmpid = atol(optlines[LOCK_FILE_LINE_PID - 1]);
            pmstart = atol(optlines[LOCK_FILE_LINE_START_TIME - 1]);
            if (pmstart >= start_time - 2 && pmpid == pm_pid){
                char       *pmstatus = optlines[LOCK_FILE_LINE_PM_STATUS - 1];
                if (strcmp(pmstatus, PM_STATUS_READY) == 0 || strcmp(pmstatus, PM_STATUS_STANDBY) == 0){
                    /* postmaster is done starting up */
                    free_readfile(optlines);
                    return POSTMASTER_READY;
                }
            }
        }
        free_readfile(optlines);
        if (waitpid((pid_t) pm_pid, &exitstatus, WNOHANG) == (pid_t) pm_pid)
            return POSTMASTER_FAILED;
        pg_usleep(USEC_PER_SEC / WAITS_PER_SEC);
    }
    /* out of patience; report that postmaster is still starting up */
    return POSTMASTER_STILL_STARTING;

2、server主進程及信號處理函數

PostmasterMain->
    pqsignal_no_restart(SIGUSR1, sigusr1_handler);  /* message from child process */
    pqsignal_no_restart(SIGCHLD, reaper);   /* handle child termination */
    ...
    StartupXLOG();
    ...
    proc_exit(0);//exit函數向主進程發送SIGCHLD信號

reaper->//進程終止或者停止的信號
    AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);

postmaster進程接收信號：
sigusr1_handler->
    if (CheckPostmasterSignal(PMSIGNAL_RECOVERY_STARTED) &&
        pmState == PM_STARTUP && Shutdown == NoShutdown){
        CheckpointerPID = StartCheckpointer();
        BgWriterPID = StartBackgroundWriter();
        if (XLogArchivingAlways())
            PgArchPID = pgarch_start();
        //hot_standby在postgresql.conf文件中配置TRUE
        //表示在恢復的時候允許連接
        if (!EnableHotStandby){
            //將standby寫入postmaster.pid文件，表示up但不允許連接
            AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STANDBY);
        }
        pmState = PM_RECOVERY;
    }
    if (CheckPostmasterSignal(PMSIGNAL_BEGIN_HOT_STANDBY) &&
        pmState == PM_RECOVERY && Shutdown == NoShutdown){
        PgStatPID = pgstat_start();
        //將ready寫入postmaster.pid文件，允許連接
        AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);
        pmState = PM_HOT_STANDBY;
    }
    ...

3、Startup進程

StartupXLOG->
    ReadCheckpointRecord
    if (ArchiveRecoveryRequested && IsUnderPostmaster){//有recovery.conf文件則ArchiveRecoveryRequested為TRUE
        //有recovery.conf文件則ArchiveRecoveryRequested為TRUE
        PublishStartupProcessInformation();
        SetForwardFsyncRequests();
        //向master進程發送PMSIGNAL_RECOVERY_STARTED信號
        SendPostmasterSignal(PMSIGNAL_RECOVERY_STARTED);
        bgwriterLaunched = true;
    }
    CheckRecoveryConsistency();-->...
    |-- if (standbyState == STANDBY_SNAPSHOT_READY && !LocalHotStandbyActive &&
    |       reachedConsistency && IsUnderPostmaster){
    |       SpinLockAcquire(&XLogCtl->info_lck);
    |       XLogCtl->SharedHotStandbyActive = true;
    |       SpinLockRelease(&XLogCtl->info_lck);
    |       LocalHotStandbyActive = true;
    |       SendPostmasterSignal(PMSIGNAL_BEGIN_HOT_STANDBY);
    |-- }
    ...
    回放一個record后，每次讀取下一個record前都會調用CheckRecoveryConsistency

當前名稱：PostgreSQLpg_ctlstart超時分析
當前地址：http://www.aaarwkj.com/article4/gipgie.html

成都網站建設公司_創新互聯，為您提供自適應網站、網站設計公司、全網營銷推廣、Google、網站維護、網站收錄

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯