<p id="m3j2d"><pre id="m3j2d"></pre></p>

混凝土攪拌車“啃胎”有幾個技巧應對

“啃胎”是指一個或多個輪胎的內側或外側出現異常加速磨損。與其他輪胎相比，一個輪胎的某一部分磨損得很快。在這種情況下不要擔心。這里有幾個小貼士可以幫助你。

"Tire gnawing" means abnormal accelerated wear on the inside or outside of one or more tires. A part of a tyre wears out faster than other tyres. Don't worry in this case. Here are a few tips to help you.

檢查全自動混凝土攪拌車氣壓是否過低或輪胎質量是否合格標準。

Check whether the air pressure of the full-automatic concrete mixer is too low or whether the tire quality meets the standard.

檢查輪胎輪輞是否不圓，并做動平衡。

Check whether the tire rim is not round and make dynamic balance.

檢查前束尺寸，轉向桿球頭是否松動，轉向器固定螺釘是否松動。

Check the toe in size, whether the steering rod ball joint is loose, and whether the steering gear fixing screw is loose.

檢查轉向軸主軸或承壓軸承是否磨損、嚴重變形或損壞。

Check whether the steering shaft main shaft or pressure bearing is worn, severely deformed or damaged.

后輪胎面不規則磨損。解決方法：檢查鋼圈、輪轂螺釘、軸頭螺釘是否松動。檢查制動轂是否不圓。檢查彈簧板和弓形夾固定螺釘是否松動。

Irregular wear of rear tire tread. Solution: check whether the steel ring, hub screw and shaft head screw are loose. Check whether the brake hub is not round. Check whether the spring plate and bow clamp fixing screws are loose.

全自動混凝土攪拌車

經常檢查胎壓，查看胎面磨損情況。

Check the tire pressure frequently and check the tread wear.

全自動混凝土攪拌車輪胎中部早期磨損的解決辦法：適當增加輪胎充氣量。（不要太高）

The solution to the early wear in the middle of the tire of the full-automatic concrete mixer: appropriately increase the tire inflation. (not too high)

增加輪胎充氣量可以減少輪胎與路面的接觸面積，從而降低輪胎的滾動阻力，節省燃油。但當充氣量過大時，會影響輪胎的減震性能，也會使輪胎變形過大，導致與地面接觸面積過小。這樣，磨損只能由胎面中部承擔，形成早期磨損。所以通貨膨脹的幅度應該是適當?shù)摹?/div>

Increasing tire inflation can reduce the contact area between the tire and the road surface, thus reducing the rolling resistance of the tire and saving fuel. However, when the inflation is too large, the shock absorption performance of the tire will be affected, and the tire will be deformed too much, resulting in too small contact area with the ground. In this way, the wear can only be borne by the middle of the tread, resulting in early wear. So the rate of inflation should be appropriate.

全自動混凝土攪拌車“啃胎”有幾個技巧應對的相關內容就到這里了，您可以參考使用，更多內容就來我們網站www.zkzdsljbc.com咨詢吧！

Here are some tips for dealing with "tire gnawing" of automatic concrete mixer truck. You can refer to it. For more information, please visit our website at www.zkzdsljbc Com consulting!

本文名稱：混凝土攪拌車“啃胎”有幾個技巧應對
新聞來源：http://www.aaarwkj.com/hangye/sdjbc/n67317.html

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源：創新互聯